Firmware Upgrade - Hyundai FD-01 Instruction Manual

Firmware Upgrade

12. Upgrading Firmware
As with most modern electronics devices, the internal control system of this radio uses a
powerful microcomputer and associated software or firmware. It may be necessary to add
new firmware to the radio to ensure best levels of performance. The new firmware can be
uploaded into the radio using a USB storage device. The upgrading process is simple but
some precautions must be taken to ensure successful results. Please read the following
instructions and notes carefully before attempting a firmware upgrade.
Contact your dealer for details of how to obtain new firmware upgrade files.
Three types of firmware upgrade files are used:
 CPU firmware (CD/USB/iPod) e.g. file name: CNC_TECH_Vxxx.cpu
 MCU firmware (RADIO/AUX) e.g. file name: CNC_TECH_Vxxx.mcu
 Bluetooth firmware e.g. file name: CNC_TECH_Vxxx.dfu
12.1. Upgrading Firmware
1) Set Ignition switch to the ACC or ON position.
2) Turn on the HYUNDAI Bluetooth radio.
3) Connect the USB storage device with the valid firmware file to the radio.
4) Reading appears on the display.
5) If the file is correct for upgrading, Update File Select appears on the display.
c
6) Turn knob . The LCD then displays as follows:
Update File Select ↔ Mcu File select ↔ Dfu File Select MODE ↔ Cpu File Select
7) Select the file to be upgraded, press knob
8) During the upgrade process, the display shows the upgrade file selected and the
progress of the upload.
9) If the firmware upgrade is successful, Completed appears on the display on the radio
changes to tuner mode.
10) If other files are to uploaded, press button
11) Repeat the operations in steps 6) to 9) above.
12) If no other files are to be upgraded, wait until the radio has returned to tuner mode, then
remove the USB storage device from the USB socket.
13) Turn the ignition switch to OFF, wait 10 seconds and then switch the ignition ON again
to complete the upgrade.
NOTE: If the MCU firmware is upgraded, all settings are changed to default and the
phonebook contents are deleted. The radio will reboot and the security code must be re-
entered.
28
c
to start the upgrade of that file.
g
to select USB.