Bluetooth Settings - Hyundai FD-01 Instruction Manual

BLUETOOTH

2.4. Bluetooth Settings

2.4.1. Setting the Automatic Call Answer Feature
If this function is selected, the HYUNDAI Bluetooth radio will automatically connect an
incoming call received by the mobile phone. This feature enhances safety as the driver
does not need to take their hands from the steering wheel to accept an incoming call.
1) Press button
2) Turn knob
3) Press knob
4) Press and Turn knob
OFF  5 SEC  10 SEC  BACK
OFF = Auto answer function is not active.
5 SEC = Automatically answers all incoming calls after a 5 second delay.
10 SEC = Automatically answers all incoming calls after a 10 second delay.
BACK = Return to previous menu.
5) After making your selection, press knob
2.4.2. Setting Calling Voice Volume Level
The level of the calling voice volume heard through the HYUNDAI Bluetooth radio and car
speakers is adjusted using this setting.
1) Follow steps 1) to 3) of above setting 2.4.1. until Voice Volume is displayed.
2) When Voice Volume appears on the display, press knob
of the calling voice.
C
3) Turn knob
4) Press knob
Note: The calling voice level may be adjusted during a call using the volume control on
the radio or using the steering wheel remote control.
2.4.3. Setting the Ringer Volume Level
The level of the ringer volume heard through the HYUNDAI Bluetooth radio and car
speakers is adjusted using this setting.
1) Follow steps 1) to 3) of above setting 2.4.1. until Ring Volume is displayed.
2) When Ring Volume appears on the display, press knob
of the ringer.
C
3) Turn knob
4) Press knob
Note: The ringer level may be adjusted during an incoming call where the ring tone is
heard using the volume control on the radio or using the steering wheel remote
control.
Note When Making Adjustments in Above Section 4.1, 4.2 and 4.3:
The settings and adjustments made above are stored in the memory of the HYUNDAI
Bluetooth radio. The settings are lost if the vehicle battery is disconnected.
12
– Settings
2)
; Bluetooth Menu is displayed.
C
until Settings is displayed.
C
until Auto Answer is displayed.
C
. The LCD then displays as follows:
right or left to adjust the calling voice volume as desired.
C
to store the level selected.
right or left to adjust the ring tone volume as desired.
C
to store the level selected.
C
to store the selection.
C
to display the current level
C
to display the current level