Hyundai FD-01 Instruction Manual page 10

Bluetooth
2.2.5. Deleting a Paired Bluetooth Device
If a previously paired Bluetooth device is no longer to be used with the HYUNDAI
Bluetooth radio, it may be deleted from memory. Refer to the example of paired devices
shown in table 1.1 on the previous page.
1) Press knob
C
2) Turn to select Device Manager.
3) Press knob
4) Turn knob
5) When Delete Phone appears on the display, press knob
Select Preset appears on the display.
6) Press preset buttons
paired. You may also turn the knob
7) Once the name of the Bluetooth device you wish to delete is displayed, in this
example, Samsung, press knob
8) The display will then show Delete No or if knob
9) To confirm deletion the selected device, select Delete Ok and press knob
10) If the Bluetooth device being deleted is connected (in this example), the display will
show Samsung LOST.
11) In the example above, the number of paired devices is now reduced to 3, leaving 3
vacant memory locations for additional devices. Table 1.2 shows the result.
Table 1.2
10
– Connection
2)
to select BLUETOOTH mode.
C
; Register Phone appears on the display.
C
until Delete Phone is displayed.
1) 1%
to display the names of the Bluetooth devices previously
~
Preset No.
1
2
3
4
5
6
C
to display the paired devices.
C
to have the Samsung device deleted.
C
is turned, Delete Ok on the display.
Bluetooth Device Name
iPhone (For example)
Nokia (For example)
Motorola (For example)
EMPTY
EMPTY
EMPTY
C
; Searching and then
C
.