System Status - Dodge Durango 2012 Owner's Manual

334 UNDERSTANDING YOUR INSTRUMENT PANEL
SELECT button until a check-mark appears next to the
setting, showing that the setting has been selected. Refer
to "Rear Park Assist System" in "Understanding The
Features Of Your Vehicle" for system function and oper-
ating information.
Display Units Of Measure In:
The EVIC, odometer, and Uconnect™ gps (if equipped)
can be changed between English and Metric units of
measure. To make your selection, press and release the
SELECT button until "ENGLISH" or "METRIC" appears.
Liftgate Chime
When this feature is selected the chime will sound when
the liftgate is in operation, signaling that the liftgate is in
operation. To make your selection, press and release the
SELECT button until a check-mark appears next to the
feature showing the system has been activated or the
check-mark is removed showing the system has been
deactivated.
Calibrate Compass
Refer to "Compass Display" for more information.
Compass Variance
Refer to "Compass Display" for more information.

System Status

Press and release the UP/DOWN buttons until one of the
following System Status messages displays in the EVIC:
• System OK
• System Warnings Displayed (will display all currently
active System Warnings)
• Tire Pressure Monitor System (shows the current pres-
sure of all four road tires). For additional information,
refer to "Tire Pressure Monitor System" in "Starting
And Operating".