Dodge Durango 2012 Owner's Manual page 564

562 WHAT TO DO IN EMERGENCIES
8. Lower the vehicle by turning the jack screw counter-
clockwise, and remove the jack and wheel blocks.
9. Finish tightening the lug nuts. Push down on the
wrench while at the end of the handle for increased
leverage. Tighten the lug nuts in a star pattern until each
nut has been tightened twice. The correct wheel nut
tightness is 110 ft lbs (150 N·m). If in doubt about the
correct tightness, have them checked with a torque
wrench by your authorized dealer or at a service station.
10. Remove the small center cap and position the alumi-
num road wheel behind rear bumper with the "beauty
side" facing rearward.
"Beauty Side"
11. Insert the two long tubes on the plastic protective
plate in the lug holes of the road wheel. Push the end of
the winch's cable, spring, steel sleeve and stamped cone
shape wheel plate though the road wheel and protective
plate.