System Status - Dodge Durango Owner's Manual

338 UNDERSTANDING YOUR INSTRUMENT PANEL
the SELECT button until a check-mark appears next to
the setting, showing that the setting has been selected.
Refer to "Rear Park Assist System" in "Understanding
The Features Of Your Vehicle" for system function and
operating information.
Display Units Of Measure In:
The EVIC, odometer, and Uconnect™ gps (if equipped)
can be changed between English and Metric units of
measure. To make your selection, press and release the
SELECT button until "ENGLISH" or "METRIC" appears.
Liftgate Chime
When this feature is selected the chime will sound when
the liftgate is in operation, signaling that the liftgate is in
operation. To make your selection, press and release the
SELECT button until a check-mark appears next to the
feature showing the system has been activated or the
check-mark is removed showing the system has been
deactivated.
Calibrate Compass
Refer to "Compass Display" for more information.
Compass Variance
Refer to "Compass Display" for more information.

System Status

Press and release the UP/DOWN buttons until one of the
following System Status messages displays in the EVIC:
• System OK
• System Warnings Displayed (will display all currently
active System Warnings)
• Tire Pressure Monitor System (shows the current pres-
sure of all four road tires). For additional information,
refer to "Tire Pressure Monitor System" in "Starting
And Operating".