Motor Harness/Wiring - GE DCB330EY Technical Service Manual

Next, remove the fan housing lock from the rear of
the blower housing.
To remove the lock, insert a flat bade screwdriver
as shown below. Pry the lock away from the housing
far enough to clear the retaining tab and lift the lock
out of the channel.
(Motor remove for clarity in illustrations)
FAN
HOUSING
LOCK
RETAINING
TAB
Once the lock is removed, the motor can be pulled
from the blower housing.
FAN
HOUSING
LOCK
16
MOTOR AND HARNESS WIRING