Gas Supply Requirements - CDA RV921 Manual For Installation, Use And Maintenance

Gas Supply Requirements

IMPORTANT: THIS APPLIANCE SHOULD BE FITTED BY A GAS
SAFE REGISTERED FITTER OR OTHER SUITABLY QUALIFIED
PERSON.
• This installation must comply with the Gas Safety (installation and
use) Regulations 1984.
• This appliance is category II2H3+ and is designed for use in the
UK and Ireland. The installation must comply with the Gas Safety
(installation and use) Regulations 1984.
• The CDA Group Ltd is not legally able to provide any assistance
in the installation of gas appliances except to Gas Safe registered
installers. Any Gas Safe registered fitter requiring help must provide
their name, address and registration number. Information supplied
will be validated before help is provided.
• This appliance is suitable for conversion to Liquid Petroleum Gas
(G30 Butane at a pressure of 28-30mbar or G31 Propane at a
pressure of 37mbar). A kit is provided. Do not attempt to fit the
conversion kit yourself.
• This appliance is adjusted for natural gas (G20) at 20mbar only.
• In the event that this appliance is not installed in accordance with
the above requirements, the appliance may be disconnected from
the mains gas supply until any faults are rectified; this is a legal
requirement.
• This appliance must not be connected to a combustion gas
recovery scavenging system.
• The connection to the gas supply must comply with all current
regulations in force.
• We are not legally able to offer advice on the installation of gas
appliances to non Gas Safe registered personnel.
32