Installation; Electrical Requirements - CDA CD 900 User Operating Instructions Manual

CAUTION:
This appliance must be installed according to these instructions.

ELECTRICAL REQUIREMENTS

Connection to the mains must be carried out by qualified personnel in accordance
with current regulations.
The appliance must be connected to the mains checking that the voltage
corresponds to the value given in the rating plate and that the electrical cable
sections can withstand the load specified on the plate.
The plug must be connected to an earthed socket in compliance with safety
standards.
The oven must be connected to the mains using a Double pole switch.
The power supply cable must not touch the hot parts and must be positioned so that
it does not exceed 75°C at any point.
Once the oven has been installed, the switch or socket must always be accessible.
If the power supply cable is damaged it must be substituted by a suitable cable
available from our after sales service.
N.B. For connection to the mains, do not use adapters, reducers or branching
devices as they can cause overheating and burning.
A 30 amp supply is required for connection of this appliance.
Always make sure that the electrical supply is of adequate size.
20

Installation