Trouble-Shooting Table - Daewoo DWF-270G Service Manual

TROUBLE-SHOOTING TABLE

Phenomenan
The draining does not work, or the speed
of draining is too slow ,The numeral tube
shows"E1"
The machine stops running In spinning.
The numeral tube shows"E2"
The safety switch acts. The
spinning can not work (after
amending twice automatically)
The numeral tube shows"E3"
Not supplying water or the speed
（
is too slow the suitable water
level doesn't research about 16
minutes.
The numeral tube shows"E4"
In pre-wash , the washer stops running,
the numeral tube shows"E5"
The numeral tube shows"E6"
The washer keeps filling water or
drains automatically.the numeral
tube shows"E7"
The numeral tube shows"E8"
The machine does not act.
(Indicators are off.)
There's abnormal sound inside
the machine.
The water faucet leaks.
The reason
Is the drain hose put down?
Is the drain hose blocked by foreign
material?
The top lid is not closed.
Are the laundries put slantingly?
Is the machine slanting?
The water faucet is not open or supplying
water is stoped.
The water inlet valve is blocked.
The top lid is not closed.
Does the water level sensor contact badly?
Does the water level sensor, inlet valve or
computer sequencer bad?
Does the temperature sensor bad?
Is the power off?
Does the power cord loose?
Is the machine slanting?
Is some metal inside the washer?
Are the laundries slanting in spinning?
Is the jointer screw of the water inlet
hose loose or twisted awry?
How to settle
Put down the drain hose.
Open and close the top lid once.
Close the top lid.
Re-order the laundries. Close the top lid.
Level the machine in right position.
Open and close the top lid once.
Open the water faucet.
Push the "Start/Pause" button.
Clean the water inlet valve .
Push the "Start/Pause" button.
Close the top lid.
Please contact with after-service center
Please contact with after-service center
Please contact with after-service center
Use it when the power is on.
Insert the power plug tightly.
Level the machine properly.
Fasten the fastener or zip up the zip.
Re-order the laundries.
Fasten the jointer screw properly.
TROUBLE SHOOTING
17