Concerning Too Much Noise In Washing; Concerning Too Much Noise In Spinning - Daewoo DWF-270G Service Manual

CONCERNING TOO MUCH NOISE IN WASHING

If the noise of the motor is too much.
If the motor fastened tightly.
If the inner gear of the retarder is engaged well.
If the belt is too tight or loose.
If the radiating pulley is loose.
The pulstator is rubbing the bottom of the inner tub.
Adjust the gap between the pulsator and the inner tub.

CONCERNING TOO MUCH NOISE IN SPINNING

If the washing machine is set horizontally.
Yes
If the hanger is wrongly used.
No
If the noise of the motor is too much.
No
If the motor is fastened tightly.
Yes
If the bearing of the retarder is well.
Yes
If the departing of the ratchet and pawl is well.
Yes
If the machine body vibrate
resonantly with the cabinet.
No
If the balance ring is rubbing the outer tub cover.
No
If the connecting pipe or the wire
unit bumps the outer tub.
No
The hanger seat is lack of oil.
Inject oil at the hanger seat .
Yes
No
No
Yes
No
Yes
Yes
No
Yes
No
No
Yes
Yes
No
No
No
Yes
Yes
Yes
Replace the motor.
Fasten the motor.
Replace the retarder.
Adjust the belt.
Fasten the radiating pulley.
Set the machine horizontally.
Replace the hanger.
Replace the motor.
Fasten the motor.
Replace the retarder.
Adjust the angle or the distance of the ratchet and pawl.
Adjust the cabinet to acquire balance.
Adjust the gap between the balance ring and the outer tub.
Fix the connecting pipe and the wire unit.
15
TROUBLE SHOOTING