Smart Function Key (Top Key); Date And Time - Panasonic KX-TG6721AL Operating Instructions Manual

Getting Started
Display language
1
#110
2
MbN: Select your desired language. a
3
M N

Date and time

Important:
R When you install the batteries for the first
time, the handset may prompt you to set
date and time. First press
proceed to step 2.
1
#101
2
Enter the current date, month, and year.
a
Example: 15 July, 2012
15 07 12
3
Enter the current hour and minute.
Example: 9:30
09 30
R You can select 24-hour or 12-hour
clock format ("AM" or "PM") by
pressing
4
a M N
Note:
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Smart function key (Top
Key)
The smart function key (Top Key) is located
on the top of the handset and informs you with
its flashing to allow you to activate the
following features by simply pressing this key.
n When the smart function indicator
flashes rapidly, you can:
– Answer the call (outside call, intercom).
(page 17, 40)
– Stop the alarm sound. (page 28)
– Stop paging. (page 40)
14
TG672xAL(en)_0125_ver011.pdf
, then
.
14
n When the smart function indicator
flashes slowly in standby mode, you can:
– Listen to new messages. (page 36)
– View the caller list when there are
missed calls. (page 33)
To activate these features, their Top key
setup must be "On". (page 14)
Using the smart function key
(Top Key)
When the smart function indicator flashes
rapidly/slowly, press MSmart functionN.
R The above features can be activated
depending the situation.
R If you answer a call using the smart
function key, the speakerphone is activated.
R Even if the handset is placed on the base
unit or charger, the feature can be
activated. You can talk or listen to new
messages without lifting up the handset. If
you want to perform further operations, lift
up the handset.
R When the unit has new messages and
missed calls, the unit can be operated to
play the new messages first and then show
the missed calls.
Note:
R While key lock is on (page 18), incoming
calls can be answered, but the following
features are disabled even when the smart
function indicator flashes slowly.
– Listen to new messages. (page 36)
– View the caller list when there are
missed calls. (page 33)
Setting the smart function key (Top
Key Setup)
The Top key setup for the following features
must be "On".
– "New Message" (Default: On)
– "Missed Call" (Default: Off)
The settings can be set for each handset.
1
#278
2
MbN: Select the desired setting and press
.
R " " is displayed next to the selected
features.
2012/01/25 9:16:15