When Connecting With A Back-Up Camera; When Connecting With A Multi-Channel Processor; When Connecting The External Video Component And The Display - Pioneer AVH-P6550DVD Installation Manual

Connecting the Units

When connecting with a back-up camera

When using this product with a back-up camera, automatic switching to video from a back-
up camera when the gear shift is moved to REVERSE (R) position is possible.
Hide-away unit
We recommend that you use
a camera which outputs
mirror reversed images.
RCA cable
(sold separately)
Back up camera
To video output
Extension lead (supplied)
10 cm 8 m
Violet/white Fuse resistor
Of the two lead wires connected to the back
lamp, connect the one in which the voltage
changes when the gear shift is in the REVERSE
(R) position. This connection enables the unit to
sense whether the car is moving forwards or
backwards.
Connection method
1. Clamp the lead. 2. Clamp firmly with
needle-nosed
pliers.
Note:
• It is necessary to set to B-CAMERA in SETUP when
connecting the back-up camera.

When connecting with a multi-channel processor

AV-BUS input (Blue)
IP-BUS input (Blue)
40 cm
Blue
15 cm
Blue
IP-BUS cable (supplied with
multi-channel processor)
This product
23 cm
Subwoofer output
or non fading output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
RCA cable (supplied with
multi-channel processor)
Blue Optical cable (supplied with
multi-channel processor)
Multi-channel processor
(DEQ-P7050)
(sold separately)
IP-BUS cable
Black Blue
Black Blue
IP-BUS cable (supplied
with TV tuner)
Hide-away TV tuner
(e.g. GEX-P6450TVP)
(sold separately)
A V-BUS cable (supplied
Black
with TV tuner)
Fig. 4

When connecting the external video component and the display

Hide-away unit
RCA cables
(sold separately)
Black
RCA cables
(sold separately)
• It is necessary to set to AV INPUT in SET UP when connecting the external video com-
ponent.
When using a display connected to rear video output
This product's rear video output is for connection of a display to enable passengers in the
rear seats to watch the DVD or Video CD.
WARNING:
Multi-CD player
• NEVER install the display in a location that enables the Driver to watch the DVD or Video CD while
(sold separately)
Driving.
• NEVER connect rear audio output (REAR MONITOR OUT) to sold separately power amp.
Fig. 5
<ENGLISH>
To audio outputs
External video
component
(sold separately)
To video output
To audio inputs
Display with
RCA input jacks
To video input
Fig. 6