When Connecting With A Rear View Camera - Pioneer AVH-P5200BT Installation Manual

Connecting the units

When connecting with a rear view camera

When this product is used with a rear view camera, it is possible to automatically switch from the
video to rear view image when the gear shift is moved to REVERSE (R).
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
CAUTION
• The screen image may appear reversed.
• The rear view camera function is to be used as an aid for backing into a tight parking spot.
Do not use this function for entertainment purposes.
• Objects in the rear view may appear closer or more distant than they actually are.
This product
Violet/white
Of the two lead wires connected to the back lamp, connect the one
in which the voltage changes when the gear shift is in the
REVERSE (R) position. This connection enables the unit to
sense whether the car is moving forwards or backwards.
• It is necessary to set Camera Polarity properly in System Menu when connecting the rear view camera.
RCA cable (sold separately)
(5-1/8 in.)
13 cm
Rear view camera input (REAR VIEW CAMERA IN)
(5-7/8 in.)
15 cm
Fuse resistor
CAUTION
You must use a camera
which outputs mirror
reversed images.
To video output
Rear view camera
(sold separately)
7