Driving The Machine - Jonsered FR13 Operator's Manual

7. When the engine has started release the ignition
key to neutral position.
Push the throttle control to the required speed.
For cutting 3/4 to full throttle.
!
WARNING!
Never run the engine indoors, in
enclosed or poorly ventilated areas.
The exhaust fumes contain toxic
carbon monoxide.

Driving the machine

1. Release the parking brake by pressing down the
brake pedal.
2. Press the clutch and engage the required gear.
To engage reverse gear the lock button must be
pressed down.
• Gears 1–4 are used for mowing.
• Gears 4–5 are used for transport.
Starting is possible irrespective of which gear is
engaged.
IMPORTANT INFORMATION
Do not change gear from forward drive to
reverse while the machine is moving.
The clutch must be used for each gear
change.
Stop the machine before changing for
forward drive to reverse, otherwise the
gearbox can be damaged.
Never use force to engage a gear. If a gear
will not engage directly release and push
down the clutch again, and then try to
engage the gear again.
DRIVING
STOP START
13
English –