Creating A User Chart - Furuno FCR-2107 series Operator's Manual

Creating a user chart

User charts are created and edited in the Planning mode. To display a user chart on ECDIS, set Points, Symbols & Tidals
and Areas on the Mariner page in the Symbol Display menu.
1. Put the arrow on User
Chart in the information
area then click the Plan
button.
2. Put the arrow on the
triangle in the dialog box,
choose Create from the
menu and then push the
scroll wheel. Enter a name
for the user chart. Click the
OK button to finish.
3. Click the Line tab and then check
"Enable changes." Click the Add
button. Spin the scrollwheel
in the Element type box to choose
line type and then push the
scrollwheel. To start a new line from
a new position, check "New start
position".
<Line type>
Coast line
Depth line
Route line
Navigation line
4. Click the Symbol tab and then check
"Enable changes." Click the Add
button. For symbol, set style (symbol or
label). Use the arrow to select location
for symbol or line and then left-click.
<Symbol style>
Symbol: Alphabet, numeric
Label: Entered name
User Chart
5. Click the Area tab and then check
X
"Enable changes." To make a new
Monitor
DISP
area, click the Add button in the Area
field.
Define Name for area. Use the arrow
Plan
DISP
to select position for points and then
push the left button.
OK
6. Click the Tidal tab and then check
"Enable changes." To mark a tidal on the
screen, use the mouse to locate the
arrow and then push the left button.
Define Name, Type, Orientation,
Strength and Time for Tidal. The Tidal
symbol is displayed on the chart
radar and ECDIS displays.
7. Click the Point tab and then check
"Enable changes." Use arrow and left
button to define location of point.
Danger Symbol
10
<Types>
Predicted: Predicted current flow
Actual: Actual current flow
kn