Test Pattern - Furuno FCV-1200L Operator's Manual

5.5

Test Pattern

The test pattern tests for proper display of colors.
1. Rotate the [FUNCTION] switch fully clockwise to select MENU.
2. Press the [ ] key to select the menu title area at the top of the screen.
3. Press the [+] key to select SYSTEM.
4. Press the [ ] or [ ] key to select TEST.
5. Press the [+] key.
6. Press the [+] key to select TEST PATTERN.
7. Press the [+] key twice to select YES in the dialog box.
8. Press the [+] key to change the test pattern.
The test pattern changes in the sequence below.
16 tones
of RED
9. Press the [MARKER/TLL] key more than three seconds to return to the system menu.
10. Rotate the [FUNCTION] switch fully counterclockwise to select EXIT.
5-6
[ ] : NO [
Test pattern selection dialog box
16 tones
of GREEN
BLACK
Test pattern sequence
] : YES
16 tones
WHITE
of BLUE
RED
BLUE GREEN