Test; Test Pattern - Furuno FCV-600L Operator's Manual

4.6 Test

The test checks the ROM, RAM, color bar
and keyboard for proper operation. You may
start the test as follows:
1. Turn on the power while pressing any key.
2. Press t. The following display appears:
ROM:
RAM:
PROGRAM No. 02522800**
** = Version no.
Figure 4-1 Test display
3. The ROM and RAM are checked and the
results are displayed as OK or NG (No
Good).
4. Press and release each key (except the
POWER key) one by one. If the key is
normal, its on-screen location lights in
black and the buzzer sounds while the key
is pressed.

4.7 Test Pattern

This feature tests for proper display of colors.
1. Turn on the power while pressing any key.
2. Press the BRILL key three times. Press
the BRILL key again to change the test
pattern as below.
GRAY
BLACK
WHITE
WHITE
G
B
R R
L
A
E E
C
D E
K
N
Figure 4-2 Test patterns
3. Press the POWER key to escape.
Y P
W
B E U A
H
L L R Q
I
U L P U
T
E O L A
E
W E
23