Msi Message Length - Honeywell Vuquest 3310g User Manual

When Check Character is set to Validate Type 10/11, but Don't Transmit,
the unit will only read MSI bar codes printed with the specified type check
character(s), but will not transmit the check character(s) with the scanned
data.
* Validate Type 10, but Don't
Transmit
Validate Type 10 and Transmit
Validate 2 Type 10 Characters,
but Don't Transmit
Validate 2 Type 10 Characters
and Transmit
Validate Type 10 then Type 11
Character, but Don't Transmit
Validate Type 10 then
Type 11 Character and Transmit
Disable MSI Check Characters

MSI Message Length

Scan the bar codes below to change the message length. Refer to
Message Length Description (page 7-2) for additional information. Mini-
mum and Maximum lengths = 4-48. Minimum Default = 4, Maximum
Default = 48.
Minimum Message Length
Maximum Message Length
7 - 38