Dyna-Glo DGB390SNP-D Owner's Manual page 13

asseMBLY insTruCTiOns
15. Open the door assembly (L) and insert the LP
gas cylinder (sold separately) into the nesting
hole located in the bottom shelf (A). Adjust gas
cylinder until positioned correctly (allowing the
gas hose to connect to gas cylinder valve).
Hand-tighten the hose/regulator coupling to
the threaded valve of the LP gas cylinder.
Tighten the tank screw until the cylinder is
secured in place inside the nesting hole of the
cart.
Fully Assembled
Front View
Rear View
15
L
13
A
Tank Screw