General Operating Instructions - Chicago Electric 69343 Owner's Manual & Safety Instructions

General Operating instructions

1� Plug the Power Cord of the tool into a 120
volt, grounded, electrical outlet�
2� Allow the Heat Gun one minute to
build up to the desired heat level�
WarninG! to prevent serious injury
do not leave the Heat Gun unattended
while pointed at surfaces or objects.
WarninG! Do not touch work area with
the Heat Gun; it could scorch or ignite.
3� The Power Button has three stages� Push
once for the low setting, push again for
the high setting, and push a third time to
turn OFF with the Automatic Cool Down
Stage� In the OFF setting the Heat
Gun will run for 80 seconds in the cool
down stage and then automatically turn
off� The green LED light is illuminated
when the gun is in the cooling function�
Heat Level
indicator LeDs
red LeD
Green LeD
Lit during
Lit during
Low temp.
cool Down
Settings
Stage
Buttons to adjust Heat
Settings up or Down
Figure B
Item 69343
red LeD
Lit during
High temp.
Settings
power
Button
For technical questions, please call 1-888-866-5797.
4� Choose the appropriate heat level for the
job and push the "+" or "–" to adjust the heat
settings� The LEDs will light up to indicate
the heat level�
# LEDs 1 2
Low Temp� 430° F 550° F 650° F 700° F 730° F 800° F
High Temp� 570° F 660° F 730° F 790° F 970° F 1160° F
5� Allow the Heat Gun one minute to build up to
the desired heat level�
WarninG! To prevent personal injury or
property damage; do not leave the Heat
Gun unattended while pointed at surfaces or
objects�
cautiOn! Do not touch work area with the
Heat Gun; it could scorch or ignite.
6� To prevent accidents, turn off the
tool and unplug it after use� Allow
the Heat Gun to cool down on an
insulated, non‑flammable surface�
WarninG! Do not leave work area
until workpiece has cooled. Be alert
for indications of concealed fire.
7� Disconnect the power supply after
use� Clean, then store the tool
indoors out of children's reach�
3 4 5 6
Page 11