2.3
Synchronizing Transmission with Echo
Sounder or Other Sonar
To synchronize transmission of the FCV-30 with an echo sounder or other type of sonar,
connect it as shown below. Also, set the Ping Setting to External, referring to page 3-4 and
3-5 of the FCV-30 Operation manual.
FCV-30 Transceiver unit
02P6330 J2(EXT-KP)
EXT-KP
EXT-KP-GND
Note: Outputting KP of FCV-30 to other sonar, echo sounder
FCV-30Transceiver unit
02P6336 J2(EXT-KP)
12V
positive
Vinyl wire (local supply)
AWG22-26
8
9
KP
6
KP-OUT 12V
7
KP-OUT-GND
Wiring for WAGO connector
Press downward.
Wire
Twist
Procedures
1. Twist the cores
2. Press the terminal opener downward.
3. Insert the wire to hole.
4. Remove the terminal opener.
5. Pull the wire to confirm that it is ecure.
11
Sonar, E/S
KP OUT
GND
(E/S transmits, SONAR)
KP
Terminal opener
WAGO connector
2. WIRING
3 to 15V
positive