Toyotomi GAN GAG A180IV Service Manual page 21

Disassemble Electric box
unplug the plugging connector of the
indoor motor at the electric box, use
screwdriver to unscrew the screw fixing
the electric box and remove the electric box.
Disassemble Evaporator
Use a screwdriver to loosen the screw (1pc) of left side,
(2pcs) of right side. Take out the evaporator with your
hands, so that the side plate clamp of evaporator falls
out from the groove. Remove the evaporator with care.
Take care to protect the connecting pipe.
Disassemble Motor
Use a screwdriver to loosen the 3 screws fixing the motor
clamp. Remove the motor clamp.
Unscrew the tighten nut which fix cross flow fan, then
can take out the motor from the cross flow fan.
Disassemble cross flow fan
Take out motor, then remove the cross flow fan
from the left bearing holder. Refer to Fig.7-27
Tube sensor
Plugging connector
Clasp
Screw
Screw
Screws
Motor right clamp
Bolts
Motor
Cross flow fan