Battery Low Warning - BT 3100 User Manual

Synergy 3100 user guide ~ 3rd Edition ~ 17th July '02 ~ 4457
2 Install the rechargeable
batteries in the handset
The handset uses two rechargeable
Nickel Metal Hydride (Ni-MH) AAA
batteries which are supplied. Take
care to insert the batteries as shown
and then fit the battery cover (the
battery cover may be found in the
packaging with the batteries).
3 Charge the handset batteries
for at least 16 hours
Before you use your Synergy 3100 for
the first time, it is important to have
the handset batteries fully charged.
The batteries need to charge
continuously for at least 16 hours
to reach full charge.
Place the handset on the base. The
red charging light will come on. The
handset comes pre-registered to the
base station as SYNERGY HS1. This is
shown on the display. The
the battery icon are shown on the
display. Once the handset is fully
charged, the display shows a full
battery symbol.
If the handset battery symbol is empty
and flashing, and you hear a warning
beep every 10 seconds, you will need
to recharge your handset before you
can use it.
The
indicates when you are in range of
the base station. If the symbol flashes
and you hear a warning beep, you
are out of range and will need to move
closer to the base station.
icon and
BATTERY LEVELS
WEAK HALF-FULL

Battery low warning

Note
symbol on your handset display
FULL
11