Print Status Page - Kyocera ECOSYS P6030cdn Operation Manual

>Print Status Page ?
Using the Operation Panel

Print Status Page

You can check the printer's current status, including available memory
space and option settings by printing a status page.
1
Press  while Report Print > is displayed.
2
Press  or  repeatedly until >Print Status Page appears.
3
Press [OK]. A question mark (?) appears.
4
Press [OK] again. The message Processing appears and the
printer prints a status page.
For a sample status page and its full description, refer to the next section
Understanding the Status Page.
Understanding the Status Page
The numbers in the following diagram refer the items explained below the
diagram. The items and values on the status page may vary depending
on the printer's firmware version.
Status Page
Printer
Firmware version
Paper Settings
Group Settings
EcoPrint
2
Print Settings
Device Common Settings
Option Status
3
Network
4
Interface Block
Memory
Emulation
Counters
Toner Gauges
1
5
6
7
8
9
6-13