Kyocera ECOSYS P6030cdn Operation Manual page 128

>>Unit
? mm
6-32
Letter
Legal
A4
B5
A5
A6
Envelope #9
Envelope #6
ISO B5
Custom
Oufuku Hagaki
Oficio II
216x340mm
16K
Statement
Folio
Youkei 2
Youkei 4
Note A6 is displayed for Cassette Size or Cassette 1
Size.
Envelope Monarch, Envelope #10, Envelope #9,
Envelope #6, Envelope DL, OufukuHagaki, Youkei 2 and
Youkei 4 are displayed when one of cassettes 2 to 4 in the
optional paper feeder PF-500/PF-510 is installed.
5
When the desired paper size is displayed, press [OK]. The paper size
is set for the paper cassette.
If you selected Custom in step 4, be sure to set the unit of
measurement and the dimensions of the paper as described in the
following sections.
Select the units of measurement as described in the next section.
Unit (Selecting the unit of measurement)
1
Press .
2
Press  or  repeatedly until >>Unit appears. The unit of
measurement can be selected between millimeters and inches. The
current unit of measurement is displayed (the default setting is mm).
3
Press [OK]. A blinking question mark (?) appears.
4
Select mm or inch using  or .
5
Press [OK].
Set the dimensions of the paper as described in the next section.
Using the Operation Panel