Sony BDV-T10 Operating Instructions Manual page 68

68
US
[Subwoofer]
[Yes]
• [Distance]
When you move the speakers, be sure to set the
parameters of the distance
(0)
from the
listening position to the speakers.
You can set the parameters from 0 to 23 feet (0.0
to 7.0 meters).
The speakers in the illustration correspond to the
following:
(DCenter speaker
®Front left speaker (L)
®Front right speaker (R)
@Subwoofer
@SuITound left speaker (L)
®SuITound right speaker (R)
0SuITound back left speaker (L) (optional)
®SuITound back right speaker (R) (optional)
. .
. .
@
':'~
"'J
~
. .... " ' I
~....
.•••
.<~
' " .•' ,
.,-----c. . . - ...
.;.-...-.-~
® ..........• . . . . . ®
@.."'
~
. .
7
IE]
~\ i /
.... \\ ! ....
.... "'-:j/ . . . .
01' 1 71
0
ltil®
[Front Left/Right] 10 ft/3.0 m: Set the front
speaker distance.
[Center]* 10 ft/3.0 m: Set the center speaker
distance.
[Surround Left/Right]* lO ft/3.0 m: Set the
surround speaker distance.
[Surround Back Left/Right] * 10 ft/3.0 m: Set the
surround back speaker distance.
[Subwoofer] 10 ft/3.0 m: Set the subwoofer
distance.
*
This item appears when you set to [Yes] in the
[Connection] setting.
em
• Depending on the input stream, [Distance] may not
be effective.
im1
• You can change a measurement unit (feet or meters)
by pressing the color button (RED).
• [Level]
You can adjust the sound level of the speakers.
You can set the parameters from -6.0 dB to +6.0
dB. Be sure to set [Test Tone] to [On] for easy
adjustment.
[Front Left/Right] 0.0 dB: Set the front speaker
level.
[Center]* 0.0 dB: Set the center speaker level.
[Surround Left/Right]* 0.0 dB: Set the surround
speaker level.
[Surround Back Left/Right] * 0.0 dB: Set the
surround back speaker level.
[Subwoofer] 0.0 dB: Set the subwoofer level.
*
This item appears when you set to [Yes] in the
[Connection] setting.
• [Test Tone]
The speakers will emit a test tone to adjust
[Level].
[Off]: The test tone is not emitted from the
speakers.
[On]: The test tone is emitted from each speaker
in sequence while adjusting level. When you
select one of the [Speaker Settings] items, the
test tone is emitted from each speaker in
sequence.
Adjust the sound level as follows.
1
Set [Test Tone] to [On].
2
Press
't/~
to select [Level], then press
0·
3
Press
't/~
to select the desired speaker
type, then press
0.
4
Press H-+ to select the left or right
speaker, then press
't/~
to adjust the
level.
5
Press
8.
6
Repeat Steps 3 to 5.
7
Press RETURN.
The system returns to the previous display .
8
Press
't/~
to select [Test Tone], then
press
0.