62
US
4
Press
1'/'"
to select the desired setting.
• "AUTO": Normally select this. The
system changes "RF CHANGE" to "ON"
or "OFF" automatically.
• "ON": The system transmits sound by
searching for a better channel for
transmitting.
• "OFF": The system transmits sound by
fixing the channel for transmitting.
5
Press
8.
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
7
When you set "RF CHANGE" to "OFF,"
select the 10 so that sound
transmission is most stable (page 57).
mmI
• In most cases, you will not need to change this
setting.
- If "RF CHANGE" is set to "OFF," transmission
between the unit and S-AlR sub unit can be
performed using one of the following channels.
- S-AIR ID A: equivalent channel for IEEE
802.11 big
channel I
- S-AIR ID B: equivalent channel for IEEE
802.11 big
channel 6
- S-AIR ID
C:
equivalent channel for IEEE
802.11 big
channel II
• The transmission may be improved by changing the
transmission channel (frequency) of the other
wireless system(s). For details, refer to the operating
instructions of the other wireless system(s).