Other Operations; Using The Control For Hdmi Function For "Bravia" Sync - Sony BDV-T10 Operating Instructions Manual

Other Operations
Using the Control for
HDMI Function for
"BRAVIA" Sync
This function is available on TVs with the
"BRAVIA" Sync function only.
By connecting Sony components that are
compatible with the Control for HDMI function
with an HDMI cable, operation is simplified as
below:
- Theater Mode (page 64)
- One-Touch Play (page 64)
- System Power Off (page 64)
- Volume Limit (page 65)
- System Audio Control (page 65)
- Language Follow (page 65)
Control for HDMI is a mutual control function
standard used by CEC (Consumer Electronics
Control) for HDMI (High-Definition
Multimedia Interface).
The Control for HDMI function will not work in
the following cases:
- When you connect this system to a
component which is not compatible with the
Control for HDMI function.
- A component does not have an HDMI jack.
There are convenient buttons on the system's
remote for operating the TV, such as
THEATER, ONE-TOUCH PLAY, and TV I/C).
For details, see "Controlling Your TV with the
Supplied Remote" (page 69) and refer to the
operating instructions of the TV.
em
• Depending on the connected component, the Control
for HOMI function may not work. Refer to the
operating instructions supplied with the component.
• The Control for HOMI function may not work if you
connect a component other than Sony, even if the
component is compatible with the Control for HOMI
function.
(Control for HDMI - Easy Setting)
The system is compatible with the Control for
HDMI - Easy Setting function. If the TV is
compatible with the Control for HDMI - Easy
Setting function, you can set the system's
[Control for HDMI] function automatically by
setting the TV. For details, refer to the operating
instructions of the TV.
If the TV is not compatible with the Control for
HDMI - Easy Setting function, set the Control
for HDMI function of the system and TV
manually.
em
• For details on setting the TV, refer to the operating
instructions.
1
Make sure that the system and the TV
are connected with an HOMI cable.
2
Turn on the TV and press
lie:>
to turn on
the system.
3
Switch the input selector on your TV so
that the signal from the system through
the HOMI input appears on the TV
screen.
4
Set the Control for HOMI function of the
system and TV.
The Control for HDMI function for system
and TV is simultaneously set to on.
-
o
-
: T
(I)
~
o
"C
(I)
~
Q)
-
o ·
::J
en
63 US