Pioneer AVH-X4690DVD Owner's Manual page 52

Appendix
Additional information
Check USB
The USB connector or USB cable has short-
circuited.
Check that the USB connector or USB cable is
not caught in something or damaged.
The connected USB storage device consumes more
than maximum allowable current.
Disconnect the USB portable audio player/USB
memory and do not use it. Turn the ignition
switch to OFF, then to ACC or ON and then
connect a compliant USB portable audio player/
USB memory.
Error-02-9X/-DX
Communication failed.
Perform one of the following operations.
–Turn the ignition switch OFF and back ON.
–Disconnect the USB portable audio player/USB
memory.
–Change to a different source.
Then, return to the USB portable audio player/
USB memory.
This DivX rental has expired.
The inserted external storage device contains expired
DivX VOD content.
Select a file that can be played.
Video resolution not supported
The inserted external storage device contains a high
definition DivX/MPEG-1/MPEG-2/MPEG-4 file.
Select a file that can be played.
It is not possible to write it in the flash.
This unit's flash memory used as the temporary stor-
age area is full.
Select a file that can be played.
52
En
Your device is not authorized to play this DivX
protected video.
This unit's DivX registration code has not been au-
thorized by the DivX VOD contents provider.
Register this unit to the DivX VOD contents
provider.
Format Read
Sometimes there is a delay between the start of play-
back and when you start to hear any sound.
Wait until the message disappears and you hear
sound.
Video frame rate not supported
DivX file's frame rate is more than 30 fps.
Select a file that can be played.
Audio Format not supported
This type of file is not supported on this unit.
Select a file that can be played.
Creating the Database has failed.
The mode was switched to video or JPEG image dis-
play while the database was being created.
Create the database again. (Page 21)
iPod
Format Read
Sometimes there is a delay between the start of play-
back and when you start to hear any sound.
Wait until the message disappears and you hear
sound.
Error-02-6X/-9X/-DX
Communication failed.
Disconnect the cable from the iPod. Once the
iPod's main menu is displayed, reconnect the
iPod and reset it.
Additional information
iPod failure.
Disconnect the cable from the iPod. Once the
iPod's main menu is displayed, reconnect the
iPod and reset it.
Error-02-67
The iPod firmware version is old.
Update the iPod version.
Stop
There are no songs.
Transfer songs to the iPod.
There are no songs in the current list.
Select a list that contains songs.
Not Found
No related songs.
Transfer songs to the iPod.
Bluetooth
Error-10
The power failed for the Bluetooth module of this
unit.
Turn the ignition switch OFF and then to ACC or
ON.
If the error message is still displayed after
performing the above action, please contact your
dealer or an authorized Pioneer Service Station.
MirrorLink
The application list could not be read out.
Failed to load the application list.
! Disconnect the cable from the smartphone,
and then connect the smartphone again after a
few seconds.
! Turn the ignition switch OFF and then to ACC
or ON.
If the error message is still displayed after
performing the above action, reset the
smartphone.
If the error message is still displayed after
performing the above action, please contact your
dealer or an authorized Pioneer Service Station.
There is no supported application on your Mirror-
Link device.
No supported applications can be found.
! Disconnect the cable from the smartphone,
and then connect the smartphone again after a
few seconds.
! Turn the ignition switch OFF and then to ACC
or ON.
If the error message is still displayed after
performing the above action, reset the
smartphone.
If the error message is still displayed after
performing the above action, please contact your
dealer or an authorized Pioneer Service Station.
Communication error occurred.
There was a communication error.
! Disconnect the cable from the smartphone,
and then connect the smartphone again after a
few seconds.
! Turn the ignition switch OFF and then to ACC
or ON.
If the error message is still displayed after
performing the above action, reset the
smartphone.
If the error message is still displayed after
performing the above action, please contact your
dealer or an authorized Pioneer Service Station.
Launching the application failed.
Failed to launch the application.
! Disconnect the cable from the smartphone,
and then connect the smartphone again after a
few seconds.