Cisco 6921 Administration Manual page 89

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Onhook Dialing Allows a user to dial a number without going off
hook. The user can then either pick up the handset
or press the Dial softkey.
Other group pickup Allows a user to answer a call ringing on a phone
in another group that is associated with the user's
group.
Privacy Prevents users who share a line from adding
themselves to a call and from viewing information
on their phone display about the call of the other
user.
Private Line The Cisco Unified Communications Manager
Automated Ringdown administrator can configure a phone number that
(PLAR) the Cisco Unified IP Phone dials as soon as the
handset goes off hook. This can be useful for
phones that are designated for calling emergency
or "hotline" numbers.
Programmable Feature The administrator can assign features, such as New
Buttons Call, Call Back, and Forward All, etc. to line
buttons.
Quality Reporting Tool Allows users to submit information about problem
(QRT) phone calls by pressing a button. QRT can be
configured for either of two user modes, depending
upon the amount of user interaction desired with
QRT.
Redial Allows users to call the most recently dialed phone
number by pressing a button or the Redial softkey.
Reroute Direct Calls to Reroutes a direct call to users' mobile phone to the
Remote Destination to enterprise number (desk phone). For an incoming
Enterprise Number call to remote destination (mobile phone), only
remote destination rings; desk phone does not ring.
When the call is answered on their mobile phone,
the desk phone displays a Remote In Use message.
During these calls, users can make use of various
features of their mobile phone.
Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP)
OL-20851-01
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
For more information, refer to the Cisco
Unified IP Phone 6921, 6941, and 6961 User
Guide, "Basic Call Handling."
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide, Call Pickup.
For more information, see the following:
Cisco Unified Communications Manager
•
Administration Guide,
Phone Configuration.
• Cisco Unified Communications Manager
System Guide, Cisco Unified IP
• Cisco Unified Communications Manager
Features and Services Guide
Privacy.
For more information, see the Cisco Unified
Communications Manager Administration
Guide, Directory Number Configuration.
For more information, refer to:
Cisco Unified Communications Manager
•
System Guide, Cisco Unified IP
• Cisco Unified Communications Manager
Administration Guide,
Template Configuration.
For more information refer to:
• Cisco Unified Communications Manager
System Guide, Cisco Unified IP
• Cisco Unified Communications Manager
Features and Services Guide,
Report Tool.
Requires no configuration.
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide, Cisco Unified Mobility.
Cisco Unified IP
Phone.
Barge and
Phone.
Phone Button
Phone.
Quality
5-11