Table of Contents
Advertisement
Large
Small surface
surface
unit setting
unit setting
MAX
MIN
6
3
3
6
MIN
MAX
MIN
MAX
6
3
Medium surface
unit setting
SURFACE
COOKING
Never cook directly on the glass.
Always use cookware.
OFF CENTER
Always place the pan in the center of
the surface unit you are cooking on.
DRAGGING
Using the tri-ring surface unit
The right front Tri-Ring surface unit has 3 sizes to
select from so you can match the size of the unit
to the size of the cookware you are using.
To use the large surface unit, press and
turn the right front control knob
clockwise to
, stopping at the desired
setting. This will activate the entire
heating area.
To use the medium surface unit,
press and turn the right front control
About the radiant surface units...
WARNING:
units are automatically disabled during
the self-clean cycle. Make sure that all
surface unit controls are turned off at all
times during the self-clean cycle. Any
surface unit that is set to an on position,
while the self-clean cycle is operating, will
automatically come on after the self-clean
cycle is finished, and could result in an
on, unattended surface unit. Wait until
the self-clean cycle is finished to set and
use the surface units.
The radiant cooktop features heating
units beneath a smooth glass surface.
NOTE: A slight odor is normal when a new
cooktop is used for the first time. It is caused by
the heating of new parts and insulating materials
and will disappear in a short time.
NOTE: On models with light-colored glass
cooktops, it is normal for the cooking zones to
change color when hot or cooling down. This is
temporary and will disappear as the glass cools to
room temperature.
Do not slide cookware across the
cooktop because it can scratch the
glass—the glass is scratch-resistant,
not scratch-proof.
Temperature Limiter
Every radiant surface unit has a
temperature limiter.
The temperature limiter protects the
glass cooktop from getting too hot.
knob clockwise to
desired setting. This will activate the
medium-size heating area.
To use the smallest surface unit,
press and turn the right front control
knob clockwise to
desired setting. This will activate the
smallest, inside heating area.
The surface unit will cycle on and off to
The surface
maintain your selected control setting.
It is safe to place hot cookware on the
glass surface even when the cooktop
is cool.
Even after the surface units are turned
off, the glass cooktop retains enough
heat to continue cooking. To avoid
overcooking, remove pans from the
surface units when the food is cooked.
Avoid placing anything on the surface
unit until it has cooled completely.
I
Water stains (mineral deposits) are removable
using the cleaning cream or full-strength white
vinegar.
Use of window cleaner may leave an iridescent
I
film on the cooktop. The cleaning cream will
remove this discoloration.
Don't store heavy items above the cooktop.
I
If they drop onto the cooktop, they can cause
damage.
Do not use the surface as a cutting board.
I
The temperature limiter may cycle the
units off for a time if:
The pan boils dry.
I
I
The pan bottom is not flat.
The pan is off center.
I
There is no pan on the unit.
I
www.GEAppliances.ca
, stopping at the
, stopping at the
7
Advertisement
Table of Contents
