Ext Sw Setup - Kenwood DNX7120 Instruction Manual

EXT SW Setup
Setting up power specification of the external
device for which the power is controlled from
this unit.
D
Display the EXT SW SETUP screen
Touch 11~$;tjilEl::iiml·
· l1ji!il,r,a··;. • • • •
in the "SETUP
Menu" screen (page 62).
D
Perform EXT SW Setup
Setting EXT SW Control 1 (EXT SWl )
[] Sets the name of the external device. See
<Character Entry> (page 49) for information
on how to enter the name.
rn
Sets the power signal output mode.
(12!
EXT SW1: Pulse, EXT SW2: Level)
Pulse: Generates a single power signal
pulse.
Level: Continues output of high power
signal.
Sets to turn output on/off each time the
button on the EXT SW Control screen is
pressed.
W
Sets the Pulse signal output time.
Outputs SOOms when "1" is set. Increases
by 200ms with each step. Up to 100 steps
can be set.
I1J
Returns to the original screen.
Setting EXT SW Control 2 (EXT SW2)
The setup method is the same as "EXT SW1 ",
English' 85