Kenwood DNX7120 Instruction Manual page 32

Connecting an iPod
Connect an iPod to this unit.
IT]
Forward music/video search area
Selects the next music/video.
[I]
Backward music/video search area
Selects the previous music/video.
[]] Information display button area
The information is displayed for 5 seconds.
~
~
Remove
all accessories such as headphone before
connecting an iPod. You may not be able to control the
iPod if you connect it with accessories attached.
When you connect an iPod to this unit, playback starts
from the song you were playing on the iPod itself
(Resume Function).
If the played song is not a video content, "No iPod Video
Signal" is displayed on the video screen.
While connecting an iPod, "KENWOOD" appears on the
iPod and the iPod's control is disabled.
32 • DNX7120/DDX712/DDX7032
Functions when Displaying the Easy
Control Panel
Displays the basic operation buttons on the
screen.
D
While the source is playing, press the [FNC]
button
~ 171~- ~
.....
KENV.<lOOI -
I
~
I - I
.7109
~
IT]
MusicNideo Search.
[I]
Plays or pauses.
~
~
• When the navigation screen is displayed, press the [NAV]
button to switch to the source playback screen.
• The Easy Control Panel is hidden when you touch a
central part of the monitor.