User Interface - Kenwood DNX7120 Instruction Manual

Setup Menu
You can setup user interface parameters.
User Interface
I
o
Display the User Interface screen
in the "SETUP Touch
Menu" screen (page 62).
D
Setup each item
[lID
Mutes the volume during voice guidance of
the navigation system. (!ri "On")
When turned "On", the volume level drops
for voice guidance.
IT§]
Sets the voice guidance method of the
Navigation system.
([2]
"On")
(DNX7120 only)
"On": Voice guidance is On.
"Off": Voice guidance is Off.
[J]
Returns to the "SETUP Menu" screen.
IT]
Moves to the "User Interface 2" screen.
W
Selects the background to display.
"Change": Displays images entered into
this unit. Refer to <Background
Select> (page 71).
W
Enables entering or deleting of background
images into or from this unit.
Press _ to enter the USB suspend
mode, and then remove the USB device.
"Memory": Enables entering of background
images. Refer to <Entering
Background> (page 70).
"Delete": Enables deleting of background
image entered into this unit.
Refer to <Background Delete>
(page 71).
[I]
Registers the source displayed in the
favorite source screen.
See <Direct Source Button Setup> (page
70).
W
Returns to the "SETUP Menu" screen.
W
Returns to the "User Interface 1" screen.
[I]
Moves to the "User Interface 3" screen.
[[] Sets an on-screen display of the iPod
68
iii
DNX7120/DDX712/DDX7032