Sirius Satellite Radio Sportster 5 User Manual page 57

Step 7: Optimize the placement of the FEA
1. Mute the volume of your Sportster SP5. The easiest way to do this is to use the
MUTE button on the remote control (see pages 65 - 66). Note, your SIRIUS radio
is still
O~.
2. Turn up the volume of your vehicle's FM radio. If you hear static or interference
adjust the position of the FEA until the static or interference is eliminated or
minimized (see Figure 38) .
•
···8~t>80'· -+-----------......
e.1t---
•
Figure 38
3. If the level of static or interference is still high, please select another FM channel
by repeating Steps 5 & 6, on pages 54 - 55.
Step 8: Permanently install the FEA
Note: If you are mounting the FEA in the vehicle's headliner, skip this step.
When you are satisfied with the FEA's mounting location. remove the suction cup mounts
and peel the backing off the bead and arrow adhesive mounts. Clean the area where the
FEA will be attached with the alcohol swab. Permanently adhere the FEA in the same
position on the glass (or A-pillar), making certain the wire is taut and is as straight as
possible (see Figure 39). If necessary, use the cable guides to hold the cable.
REMOVE REMOVE REMOVE
ADHESIVE BACKING BOTH SUCTION CUPS ADHESIVE BACKING
FRO~.,~~~ ~/.~~OMB~AD
~:-:
' t .
·-ttt~::i
I I
{~~-:::~
"-z
THIS THINNER PORTION OF THE FEA
~.
" USETHE
C~LE
GUIDJS TO
HO~
THE
CABLE~
SHOULD BE TAUT WHEN THE FEA IN POSITION UNTIL IT REACHES
IS PERMANENTLY ADHERED THE INNER TRIM OR MOULDING
Figure 39
[ Installation]
57