GE CustomStyle Profile Performance 22 Owner's Manual page 14

Preparing to install the refrigerator.
Dimensions and Specifications
WARNING!
Stability Precaution for Models with Door Trim Kit
The refrigerator is much heavier with decorator door panels. To prevent the refrigerator from tipping over,
you must do one of the following:
Install the refrigerator in an alcove or wall recess with a soffit height of 70
Install a 2" (51 mm) X 4" (102 mm) wood block, the full width of the refrigerator. Secure the
block with a minimum of three (3) wood screws penetrating at least 3/4" (19 mm) into wall studs.
14
(for CustomStyle models)
"
70 1 /
4
(1784 mm)
"
36 1 /
8
(918 mm)
"
24 1 /
2
(622 mm)
Block
Side View
Electrical
3/4" (19 mm) Airspace
(1/2" (8 mm) Gap + 1/4"
24"
(6 mm) Wall Plates)
(610 mm)
" (622 mm)
Cabinet 24 1 /
2
Side Panels
/ " (1784 mm).
1
4
Soffit
Side View
Water
25" (635 mm)
Counter Top