Before You Begin; Estimated Assembly/Set-Up Time - Razor Dirt Rocket MX350 Owner's Manual

BEFORE YOU BEGIN

Remove contents from box. Remove the foam separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during
shipping. Because the Dirt Rocket or the MX500 was 95 percent assembled and packed at the factory, there should not
be any problems, even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
Allow up to 30 minutes for assembly, not including initial charge time.
Allow up to 12 hours for initial charge (see page 3 for charging information).
Front Fork
Wheel
Tire
Drive
Chain
Required Tools
Some tools may be supplied; however, we recommend the use of mechanic's grade tools. Use the supplied tools only
as a last resort.
4mm and 5mm
hexagonal key wrenches
(included)
Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com
or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacifi c Time.
Rear Brake Lever
Brake Lever
Adjuster
Back Brake
Adjuster
Front Brake Lever
(MX500 Only)
Bicycle-style tire pump for Schrader
valve tires, with pressure gauge
Charger
Charger
Port
Charger
Plug
Speed Control
Stand
2
WARNING:
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR
RAZOR DIRT ROCKET OR
MX500. The Dirt Rocket and
MX500 have been built to certain
Razor design specifi cations. The
original equipment supplied at the
time of sale was selected on the
basis of its compatibility with the
frame, fork and all other parts.
Certain aftermarket products may
or may not be compatible.
Note: The illustration to the left
shows the Dirt Rocket, the MX500
has an additional front brake. Check
the Razor web site for technical
updates on the latest service and
adjustment procedures.