Optional Battery Case - Icom IC-A24E Instruction Manual

7
BATTERY PACKS
D Regular charging
q Attach the battery pack to the transceiver.
w Be sure to turn the transceiver power OFF.
e Connect the Wall charger or optional cable (CP-20) as
shown below.
r Charge the battery pack approx. 8 hours, depending on
the remaining power condition.
DO NOT charge the BP-210N more than 12 hours. Other-
wise, the BP-210N will be damaged. The BP-210N must
be charged for 8–12 hours only.
IC-A24E/A6E with the
attached battery pack
Turn power OFF
To [DC 11V]
26
CAUTION
• DO NOT
modify the CP-20. A modifi-
cation could cause a fire or electrocu-
tion.
• BE CAREFUL
not to cut or fray the
CP-20's power cable when disconnect-
ing/connecting the CP-20 from/to the
cigarette lighter socket.
CP-20 (for 11 24 V)
(optional)
To the cigarette
lighter socket
all charger

■ Optional battery case

When using a battery case attached to the transceiver,
install 6 × AA (LR6) size Alkaline batteries, as illustrated
below.
q Remove the battery case from the transceiver.
w Install 6 × AA (LR6) size Alkaline batteries.
• Be sure to observe the correct polarity.
CAUTION:
• When installing batteries, make sure they are all the
same brand, type and capacity. Also, do not mix new
and old batteries together.
• Keep battery contacts clean. It's a good idea to clean
battery terminals once a week.