Optional Battery Case; I Optional Battery Case - Icom IC-F9011B Instruction Manual

I Optional battery case

When using the optional battery case attached to the trans-
× AA (LR6) size alkaline batteries as illustrated
ceiver, install 6
at right. The BP-237 meets JIS waterproof specification grade
4.
q Hook your finger under the latch, and open the cover in the
direction of the arrow (q). (Fig.1)
w Then, install 6 × AA (LR6) size alkaline batteries. (Fig.2)
• Install the alkaline batteries only.
• Be sure to observe the correct polarity.
• Do not pin the ribbon under the batteries.
e Close the cover by fitting in the direction of the arrow (w)
first, then check the latch is in place (e). (Fig.1)
• Be sure the gasket and the ribbon are set correctly, and do not
protrude from the battery case. (Fig.3)
CAUTION:
• When installing batteries, make sure they are all the same
brand, type and capacity. Also, do not mix new and old
batteries together.
• Keep battery contacts clean. It's a good idea to clean bat-
tery terminals once a week.

OPTIONAL BATTERY CASE

Fig.1
q
w
Fig.2
Fig.3
Latch
BP-237
e
Gasket
5
5
21