Canon Selphy DS810 Photo Printing Manual page 50

Printing Photographs Directly from a Digital Camera
Photo Paper Plus Glossy. The following sizes and types of paper can be loaded
in the printer by selecting options from Paper size and Paper type.
"Paper size" setting
I
"Paper type" setting
I
Paper loaded in printer
10x15 cm /4"x6" Photo
Photo Paper Plus Glossy
Photo Paper Plus
Semi-gloss
Glossy Photo Paper
Photo Stickers*
Fast Photo Photo Paper Pro
5.4x8.6 cm / Credit Card Photo
Glossy Photo Paper Credit
Card
*
Sticker media manufactured by Canon. Set Paper size to 10x15cm/4 t1 x6
11
when printing stickers .
• About "Layout" and "Trimming"
For Layout, when you have selected Default (selections based on the printer
setting), the printer operates based on the Settings screen.
W
Note
When printing onto Photo Stickers (PS-101) (16-up), use the following settings.
1 Load the paper.
2 Select 10 x 15 cm/4" x 6
11
for the Paper size, and Photo for the Paper type.
3 Select N-up for Layout, then select 16.
Some PictBridge compliant devices display the Layout option; 2-up, 4-up, 9-up, and
16-up. In this case always select 16-up. If there are no options on the PictBridge
compliant device that correspond to 2-up, 4-up, 9-up, or 16-up, printing on stickers is
not possible.
By default,
Off
(No trimming) is selected for Trimming.
• About "Image optimize"
When you have selected Default (selections based on the printer setting), the
printer operates based on the Settings screen.
If you use a Canon PictBridge-compliant device, you can select VIVID, NR,
VIVID+NR, or Face. (Note that these options cannot be selected for some
models.)
W
Notes
• When VIVID is selected, green and blue portions of photos are printed vividly.
• When NR (Noise Reduction) is selected, noise in blue portions, such as the sky, and
dark portions is removed.
• When VIVID+NR is selected, functions of both VIVID and NR are performed.
• When Face is selected, backlit images are corrected when printed.