Canon Selphy DS810 Photo Printing Manual page 24

Preparation When Using the Printer
4
Load the paper.
Important
*
During printing, part of the sheet
is ejected from the back of the
printer.
Leave 12cm (4.7in) or more clear
space at the back of the printer.
(2) Align the paper with the right edge of the Auto Sheet
Feeder and insert the paper until it is fully inserted.
r-------
(1) Insert the paper into the Paper Support with print side
facing up.
When loading the credit card sized paper, load sheets
in the portrait position (feed from the short side).
(3) Slide the Paper Guide
against the left side of
the stack of paper.
• 101.6x152.4mm/
4
1
x6" paper
• Photo stickers
Shorter margin
W
Note
Do not touch the printed surface until the ink dries. For specific drying times, refer to
the instructions packaged with your media.
22