Operation - Schwinn 418 Owner's Manual

F I T N E S S S A F E G U A R D S
Failure to follow any of these safeguards may result in injury or serious health problems.
• Do not place fingers or any other objects into moving parts of the exercise equipment.
• Keep children and pets away from the 418/428 elliptical while machine is in use. A child's curiosity may
result in injury. Do not allow children to use the elliptical. The pedal travel ranges are designed and
intended for adults, not children.
• Never turn pedal crank arms by hand. To avoid entanglement and possible injury, do not expose hands or
arms to the drive mechanism.
• Do not dismount the elliptical until the pedals are at a complete STOP.
• Warn bystanders to keep a safe distance. Do not allow anyone to touch the elliptical while it is in motion.
• Setup and operate on solid level surface
• Replace or tighten any worn or loose components before using
• Do not wear loose or dangling clothing while exercising
• Care should be taken when mounting and dismounting
10
USING THE 428P COMPUTER
Using the 428p Computer
FIG.3
For added workout variety, the on-board computer features
a selection of 5 preprograms as well as a manual mode
program. The manual mode program can be easily
accessed via pressing the Start button twice. (Fig.3)
All other workout programs require you to input data. The
computer also features multi-feedback functions and easy-
to-read LED displays to keep track of your workout
performance and progress. By taking a few moments to
fully understand the computer operation and functions,
you will get more pleasure, motivation and value from your
428p elliptical workouts. It's really very easy.
Accessing the Computer Workout Programs
You have two options of accessing programs: 1. Utilize the "Quick Start" feature or 2.
Program the computer by entering specific data as explained below.
Quick Start
To utilize the Quick Start feature on the computer, simply begin pedaling. Press the
"ENTER/START" button twice and the computer will begin immediately. The default
setting for the quick start program is a manual program with a resistance level of
three. You can easily change the resistance of three. Press "Reset" then "Enter/Start"
while all lights are on. You can easily change the resistance level at any time by
pushing the UP or DOWN buttons.
11