Troubleshooting - iHome iH82 User Manual

Symptom
Unit not responding
AC adaptor isn't plugged to a wall outlet
(no power)
or the connector is not plugged into the
power supply jack on the back of the unit
Wall outlet is not functioning
Batteries are weak
Batteries were not installed properly
Using no insert or wrong iPod insert
iPod does not dock
properly
iPod not docked properly
iPod does not iPod is not installed properly
respond to the unit
Your iPod software is too old
iPod is locked up
Using 1
devices.

Troubleshooting

Possible Problem
st nd
or 2 generation iPod or other
Make sure the AC adaptor is plugged into a
working AC outlet and connected properly to
the back of the iH80. If the outlet is controlled
by a switch, make sure the switch is on
Plug another device into the same outlet to confirm the
outlet is working
Replace with new batteries
Check to make sure the polarity ( + and – ends) matches
the diagram in the battery compartment
Make sure the dock insert is the proper fit for your iPod
Remove your iPod from the dock and check for
obstruction on the connectors in the dock and on your
iPod. Then reseat it in the dock.
Remove your iPod from the dock and check for
obstruction on the connectors in the dock and on your
iPod. Then reseat it in the dock.
Upgrade software on your iPod. For details visit
http://www.apple.com/ipod/download
Please make sure your iPod is working properly before
docking into the unit. Please refer to your iPod manual for
details.
iH82 cannot control those iPods or other devices.
8
Solution