Playing Audio Via Aux / Troubleshooting - iHome iDM5 Quick Start Manual

Playing Audio via Aux
1. Move the Bluetooth/Aux Switch to the Aux position to listen to audio via aux line-in.
2. Connect a standard 3.5mm stereo audio cable (not included) to the headphone or line-out jack on your
audio device and plug the other end into the aux-in jack located on the back of the keyboard.
3. Press and release the
4. Use the or
device, too.
5. When done listening, press and release the
.
device, too
Troubleshooting
Unit doesn't respond (no power)
• Check that all connections are correct and properly plugged in. Make sure your device is properly
paired with the iDM5.
Keyboard doesn't respond (when I type, nothing appears on my tablet/device)
• Touch the tablet/device's screen to activate the app or browser you wish to input text to. When the
cursor appears, you should be able to input text using the iDM5 keyboard
The on-screen keyboard on my iPad/iPhone/iPod isn't accessible
• Press the iPad/iPhone keyboard key on unit to toggle the iPad/iPhone/iPod on-screen keyboard
on and off.
Trouble pairing device with iDM5
Bluetooth implementation varies depending on your computer's hardware and operating system.
• Make sure you have the latest firmware for your iPad, iPhone or iPod (update via iTunes if needed).
• Make sure your device is working properly. Check your device's manual for details on Bluetooth
pairing and linking.
For further information, visit www.ihomeaudio.com/support
Button to turn on the unit.
Keys/Buttons to adjust volume. You may wish to adjust the volume on your audio
Button to turn the unit off. Remember to turn off your audio
7