Table of Contents
Advertisement
Setup -
FTP Setup
To transfer/save the image to the relevant sites through FTP,
then FTP needs to be setup.
1
Use Passive Mode
Check it to use Passive mode for FTP transfer. If it is not check,
the transfer becomes Active Mode. However, if you select
active mode, it is possible that there might be problems due
to the firewall. Consult with your network manager.
In Active mode, the FTP transfer might not work due to the
firewall. In this case, ask to the network administrator.
2
FTP Server Address
Define FTP Server IP Address. If IP Address form is incorrect,
a Message box will be shown to try again.
3
Upload Path
Define a path in FTP server to store video. For the path name,
English Alphabets, numbers and special characters
can be used.
4
Port
Define the FTP Server Port. If Port is not appropriate, it is
impossible to access to FTP Server.
5
User ID
Define User ID to access to the FTP Server. Fill out the correct
User ID registered in the FTP Server.
6
Password
Define Password to access to the FTP Server. Fill out the
correct Password registered in the FTP Server.
7
Click 'Apply' to make above setting effective.
Refer the above screen image for the example.
38
1
2
3
4
5
6
7
Advertisement
Table of Contents
