Genie IPC2 User Manual page 25

Camera Setup -
Camera Setup 2 (2M Camera Only)
Bright
Using this control, brightness of image can be adjusted to meet your
preference.
Sharpness
Using this control, sharpness of image can be adjusted to meet your
preference.
Mirror
Reverse the video from side to side.
Flip
Reverse the video from up to down.
Mode
This function will prevent flickering screen from the natural outdoor
light or indoor light.
Flickerless(Read Only)
Day & Night
Auto: In this mode, the IR cut filter is removed automatically
depending on the light condition around.
Day: In this mode, the IR cut filter is applied to the image sensor all
the time. Thus, the sensitivity will be reduced in the dark light
condition but the better color reproduction performance are
obtained.
Night: In this mode, the IR cut filter on the image sensor is removed
all the time. The sensitivity will be enhanced in the dark light
condition but the image is black and white.
TDN BW Level
It is a level to change Day mode into Night mode when Day & Night
mode is Auto.
TDN Color Level
It is a level to change Night mode into Day mode when Day & Night
mode is Auto.
WDR / BLC
WDR: This function is intended to provide clear live image even under
back light circumstances when there are both very bright and very
dark areas simultaneously in live video.
BLC: When the background is too bright or the object is too dark, the
backlight compensation will make the target object look clearer.
Digital Slow Shutter
The slower the shutter setting, the brighter the image is. However, the
haunting can happen on the image when the object is moving fast.
AGC
Enhances the brightness of the image by amplifying gain when the
illumination is low.
DNR
If reduces the noise caused by 'AGC' action. If set towards 'HIGH', the
noise will be reduced but the ghost effect on moving objects will be
increased.
White Balance
Auto: The color temperature is adjusted automatically between
2500K and 10000K.
Auto-L: The color temperature is adjusted automatically between
2500K and 7000K.
Auto-H: The color temperature is adjusted automatically between
4000K and 10000K.
Preset: Color temperature of moment of select to Preset is set to WB
in current environment.
Manual: The color temperature and the R/B gain level can be set up
manually.
Kelvin
This function is set to the range of color temperture to adjust the WB.
R / B Gain
Shutter
If Shutter is set to Auto, shutter speed is adjusted automatically
which refers to surrounding illumination.
Shutter Speed
If this speed is faster, the moving object can be photographed
without the ghost effect. However, picture can be dark if there is no
sufficient lighting. This menu is activated when Shtter is set to Manual.
25