Genie IPC2 User Manual page 23

Web Viewer Screen -
Control Tab
9
Speaker Control. Enable/Disable Audio stream received
from the camera and Volume control of the speaker in the
computer.
10
Mic Control. Enable/Disable the Audio stream to the camera.
11
Motion Detection. Enable or Disable motion detection
function. 'Area Setup' below must be done in advance.
14
Event Alert Icon(
Detection' is activated. Icon will remain unless 'Event Display
Clear' button is clicked.
While the motion detection is activated, this function is
de-activated momentarily if the OSD and OSD menu is shown on
the screen. Then, it is re-activated when the OSD and OSD menu
is disappeared.
12
Sensitivity. Define the sensitivity of motion detection. If
High is selected, it will detect very small motion while it
becomes relatively insensitive when Low is selected.
9
13
Area Setup. Setup the target area of motion detection.
10
<How To Setup>
1) If 'Set' button is clicked, Live screen shows grids to help area setup.
11
2) By clicking or dragging mouse on the grids, create or erase the
masks on the main view.
3) Motion detection is effective in the masked Area.
12
4) Save setting by clicking 'Save' button.
Area Setup is possible only on the Ch No.1 in the 'Video Format' .
13
If you change the video format, motion detection area will return
the setup to the default.
Masked Area
Detection Effective
14
Hide Button. Hide all control panels extended.
23
) appears on the screen if 'Motion
Unmasked Area
No Detection