Table of Contents
Advertisement
Standby limitations
Standby will not function under the following conditions:
Power is turned back on immediately after shutting down.
Memory circuits are exposed to static electricity or electrical noise.
Restarting the computer
Certain conditions require that you restart the computer system. For example, if:
You change certain computer settings.
An error occurs and the computer does not respond to your keyboard
commands.
There are two ways to restart the computer system:
1. If you are using Windows XP, click start then click Turn off computer.
From the Turn off computer menu select Restart.
If you are using Windows 2000, click Start and click Shut Down. From the
Shut Down menu select Restart.
2. Press the power button and hold it down for five seconds. Wait 10 to 15
seconds, then turn the power on again by pressing the power button.
Restarting the computer
3-13
Advertisement
Table of Contents
