Toshiba 2010 User Manual page 111

FDD −> −> −> −> −> HDD −> −> −> −> CD-ROM −> −>
−> −> −> −>
HDD −> −> −> CD-ROM −> −> −> LAN −>
−> −> −> CD-ROM −> −> −> LAN −> −>
FDD −> −> −>
−> −> −> −>
CD-ROM −> −> LAN −> −> −> −> HDD −>
−> LAN −> −> −> −> −> −> FDD −>
CD-ROM −> −> −>
* The CD-ROM is available only with the optional optical disk drive.
You can override the settings and manually select a boot device in one of two ways.
Press one of the following keys while the computer is booting:
U
Selects the USB diskette drive.
N
Selects the Network.
1
Selects the primary HDD.
P
Selects the PC card HDD.
C
Selects the CD-ROM*.
This procedure does not affect the settings.
Use hot keys.
1. Hold down F12 and boot the computer.
2. The following menu will be displayed with the following icons: Built-in HDD,
CD-ROM, FDD, Network (LAN), PCA (ATA) card boot.
NOTE: A bar will appear only under the selected device.
3. Use the left/right cursor keys to highlight the boot device you want and press
Enter.
−> LAN −> −> −>
The computer looks for bootable files in the
following order: diskette drive, HDD, CD-
ROM* and LAN.
−> −>
−> FDD −>
The computer looks for bootable files in the
following order: HDD, CD-ROM*, LAN
and diskette drive.
−> −> HDD The computer looks for bootable files in −>
−>
the following order: diskette drive, CD-
ROM*, LAN and HDD.
−> −>
−> −> FDD The computer looks for bootable files in
the following order: CD-ROM*, LAN,
HDD, diskette drive.
−> −> −> HDD The computer looks for bootable files in
−>
the following order: CD-ROM*, LAN,
diskette drive and HDD.
HW Setup
7-7